Miele KM2335 Manuale Scaricare il pdf (Pagina 39)

Installation

Make the worktop cut-out as shown

in "Building-in dimensions".

Remember to maintain the minimum

safety distances (see "Safety

instructions for installation").

Seal the cut surfaces on

wood/laminated worktops with a

suitable heat-resistant sealant to

avoid swelling caused by moisture.

Make sure that the sealant does not

come into contact with the top of the

worktop.

^ Feed the connection cable down

through the cut-out.

^ Place the hob in the cut-out without

securing it.

If the corners of the frame are not

flush with the worktop surface, the

corner radius (ß R4) can be carefully

scribed to fit.

Connect the hob to the mains (see

"Electrical connection").

Connect the appliance to the gas

supply (see "Gas connection").

Secure the appliance at the back and

front using the fixings supplied. See

"Securing the appliance".

Hobs with frame

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 59 60

Nessun commento

Miele KM2335 Manuale Pagina 39